The G4 Quicksilver came in 533MHz, 667MHz, 733MHz, 800MHz, 933MHz, And 1.0GHz speeds.

56 Questions View all

Removing fan under power supply

How do I remove the fan that is mounted under the power supply. I've removed all visible screws and still cannot remove the fan unit for replacement. Do I have to remove the hard drive units to access a possible screw under the fan?

Thanks,

David

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Hi, The closest thing I could find is this ifixit teardown. Maybe from looking at it you can see what you need to know. Good luck. Ralph

Power Mac G4 Quicksilver Teardown

Was this answer helpful?

Score 1

Comments:

I consulted the teardown before posting my question. While it is very well done, it didn't answer my small question.

Thanks Ralph.

by

I wish I had better info for you but think you may just have to remove the drives to get to that fan.But that is a guess and worth maybe .02. Ralph

by

Off I go then to do so. I'll post back if it worked. Thanks again.

David

by

Add a comment

Add your answer

David will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,403