Skip to main content

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

432 Questions View all
Question Closed

Dual Hard Drive Kit + a SSD with Sata3

Hello,

i want to buy for my iMac Midd2011 21.5 the Dual Hard Drive Kit and a SSD with Sata3. When i installing the SSD step by step with this Guide Installing iMac Intel 21.5" EMC 2428 Dual Drive Kit, will the SSD run with Sata3 or Sata2?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

If you've run the iMac EFI Update 1.6, release you have 6 Gb/s Serial ATA 3.0 support and SATA3 should be detected by the drive and the processor. However I would contact iFixit Customer Support (This is not Customer Support but the VOLUNTEER DIY board) and verify that there is not a SATA 2 choke on that kit.

If this answer was helpful please remember to return and mark it Accepted.

Was this answer helpful?

Score 1
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 675