Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all
Question Closed

Options

Ipone 4 Water damage , keeps on looping on the Apple Symbol

Ipone 4 Water damaged for , keeps on looping on the Apple Symbol only when its connected to the computer.

I have managed to put on recovery mode to restore the device through I tunes but unfortunately this didn't help.

I am assuming there is short circulation which specify's my main question here.

If there is any hardware fix can be done to this issue and what part should be replaced or fixed.

Many thanks for your help in Adnvance

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
3 Comments

You say it "keeps on looping on the Apple Symbol only when its connected to the computer." what does it do when it is not connected?

by

hi, take to a profensl and get rigt

by

I Fixit is a great web site to help people to fix their devices by themselves and that's what I'm trying to do, thank you for your comment anyway.

I remain expecting technical advice.

by

Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Amjad, since it did have an immersion :-) the first thing I suggest doing is to not longer try to turn it on or charge it. It is easily possible that you are shortening out parts on the logic board i.e. the power management IC. If anything, disassemble your phone using these guides. Once you have that done, clean your phone with high grade isopropyl alcohol and this guide. It was written for a 3g but all the points are valid for your phone as well. Once its clean, replace the battery and re-evaluate for further (if any) damage. Hope this helps, good luck.

Was this answer helpful?

Yes No
Score 1
Add a comment
Most Helpful Answer

Options

had a similar problem with a non-aquarised iphone 4. indeed it was the battery. after replacing it, the phone started again without the need to hook it up and without apple symbol bootloop. you could try that.

greets

Was this answer helpful?

Yes No
Score 1
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 709