Model No. A1367 / 8, 16, 32, or 64 GB capacity

1293 Questions View all

Digitizer cable does not stick.?

I recently bought a new screen to replace on my itouch 4g and got through the whole process fine, but when i go to cloce the new screen onto the rest of the device the digitizer cable comes loose and won't stay stuck on the connection point resulting in my screen not working at all. The screen works if I hold the digitizer cord on the connection point but as soon as i go to close the screen it turns off. What should i do to get it to stick?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Once it is connected you should hear a light click sound. It has to be lined up very close to click in place. There is a bumper installed on the back of the board that if it doesn't come off with the old connector it will hold the connector off and not click in.

Was this answer helpful?

Score 1
Add a comment

Add your answer

kyle will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 566