Skip to main content
Help

Current version by: jayeff ,

Text:

Hi @apple_fixnoah ,
Did you remove any shields that are covering some components, you didn’t say? Water may have got in under there as well.
It also might depend on what other additives were in with the 70% IPA and whether or not they leave conductive residues when dry.
-99+% IPA is definitely better option if possible.
+99+% IPA is definitely the better option if possible.
In the interim it may be best to not attempt to charge it or to turn it on and to disconnect the battery from the systemboard and wait until the ultrasonic cleaner arrives and use it and then check.

Status:

open

Edit by: jayeff ,

Text:

Hi @apple_fixnoah ,
Did you remove any shields that are covering some components, you didn’t say? Water may have got in under there as well.
-It also might depend on what other additives were in with the 70% IPA and whether ot not they leave conductive residues when dry.
+It also might depend on what other additives were in with the 70% IPA and whether or not they leave conductive residues when dry.
99+% IPA is definitely better option if possible.
In the interim it may be best to not attempt to charge it or to turn it on and to disconnect the battery from the systemboard and wait until the ultrasonic cleaner arrives and use it and then check.

Status:

open

Original post by: jayeff ,

Text:

Hi @apple_fixnoah ,

Did you remove any shields that are covering some components, you didn’t say? Water may have got in under there as well.

It also might depend on what other additives were in with the 70% IPA and whether ot not they leave conductive residues when dry.

99+% IPA is definitely better option if possible.

In the interim it may be best to  not attempt to charge it or to turn it on and to disconnect the battery from the systemboard and wait until the ultrasonic cleaner arrives and use it and then check.

Status:

open