Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Current version by: Disassembled ,

Text:

back of your machine.
 
Your diagram does not list the color code but shows that your lid lock connects to J6 on your control unit PCB. You will need apply the jumper to whatever colored wiring attaches to J6 contact 1 and 3 (most likely red and blue but I'd hate to guess and have you damage your machine)
 
Here is a spare tech sheet for you just in case you lost youryour. Go to page 18 [document|25081]
Here is a spare tech sheet for you just in case you lost youryour. Go to page 18 [document|25081]

Status:

open

Original post by: Disassembled ,

Text:

back of your machine.

Your diagram does not list the color code but shows that your lid lock connects to J6 on your control unit PCB. You will need apply the jumper to whatever colored wiring attaches to J6 contact 1 and 3 (most likely red and blue but I'd hate to guess and have you damage your machine)

Here is a spare tech sheet for you just in case you lost your

Status:

open