Skip to main content
Help

Current version by: jayeff (vote details) ,

Title:

Power to LED backstrips but not lighting

Text:

I have tested LED strips and all light up. I test them with led tested an both line test out at 100v and all come on. When plugged into the power board I am getting 180 to the 1st + and 90 to the 2nd but still will not light up. I have changed out both the power board and the main board. I get flashing standby light and see image with flashlight test, yet still mo backlights

=== Update (02/19/2021) ===

[image|2333189]

here you

Device:

UN50mu6300fxza

Status:

open

Accepted Answer:

681379

Edit by: Jason Schelling ,

Title:

Power to LED backstrips but not lighting

Text:

I have tested LED strips and all light up. I test them with led tested an both line test out at 100v and all come on. When plugged into the power board I am getting 180 to the 1st + and 90 to the 2nd but still will not light up. I have changed out both the power board and the main board. I get flashing standby light and see image with flashlight test, yet still mo backlights
 
=== Update (02/19/2021) ===
 
[image|2333189]
 
here you

Device:

UN50mu6300fxza

Status:

open

Accepted Answer:

681379

Edit by: Jason Schelling ,

Title:

Power to LED backstrips but not lighting

Text:

I have tested LED strips and all light up. I test them with led tested an both line test out at 100v and all come on. When plugged into the power board I am getting 180 to the 1st + and 90 to the 2nd but still will not light up. I have changed out both the power board and the main board. I get flashing standby light and see image with flashlight test, yet still mo backlights

Device:

UN50mu6300fxza

Status:

open

Accepted Answer:

681379

Original post by: Jason Schelling ,

Title:

Power to LED backstrips but not lighting

Text:

I have tested LED strips and all light up. I test them with led tested an both line test out at 100v and all come on. When plugged into the power board I am getting 180 to the 1st + and 90 to the 2nd but still will not light up. I have changed out both the power board and the main board. I get flashing standby light and see image with flashlight test, yet still mo backlights

Device:

UN50mu6300fxza

Status:

open