If your JBL Flip 4 speaker refuses to turn on, see the [https://www.ifixit.com/Wiki/JBL_Flip_4_Won%E2%80%99t_Turn_On|JBL Flip 4 Won’t Turn On problem page] for possible causes and solutions.
+
If your JBL Flip 4 speaker refuses to turn on, see the [[JBL Flip 4 Won’t Turn On|JBL Flip 4 Won’t Turn On problem page]] for possible causes and solutions.
+
+
If your JBL Flip 4 speaker will not charge or won’t hold a charge, see the [https://www.ifixit.com/Wiki/JBL_Flip_4_Will_Not_Charge_Or_Won%E2%80%99t_Hold_a_Charge|JBL Flip 4 Will Not Charge Or Won’t Hold a Charge problem page] for possible causes and solutions.
Try:
Connect the power source.
Then long press together: JBL Connect + Volume up.
I have not tried it, but some sources say it is for exiting firmware update mode. So, no high hopes, but it's worth a try.
Either way, I would say not to throw it away. At least here, in Romania, you can buy second-hand parts for it, like logic board, or sell your unit for parts. Maybe also in your country.
If your JBL Flip 4 speaker refuses to turn on, see the [https://www.ifixit.com/Wiki/JBL_Flip_4_Won%E2%80%99t_Turn_On|JBL Flip 4 Won’t Turn On problem page] for possible causes and solutions.
+
Try:
-
Connect power source.
+
Connect the power source.
Then long press together: JBL Connect + Volume up.
I have not tried it, but some sources say it is for exiting firmware update mode. So, no high hopes, but it's worth a try.
-
Either way, I would say not throw it away. At least here, in Romania, you can buy secondhand parts for it, like logic board, or sell your unit for parts. Maybe also in your country.
+
Either way, I would say not to throw it away. At least here, in Romania, you can buy second-hand parts for it, like logic board, or sell your unit for parts. Maybe also in your country.
Then long press together: JBL Connect + Volume up.
I have not tried it, but some sources say it is for exiting firmware update mode. So, no high hopes, but it's worth a try.
+
+
Either way, I would say not throw it away. At least here, in Romania, you can buy second hand parts for it, like logic board, or sell your unit for parts. Maybe also in your country.
Try:
Connect power source.
Then long press together: JBL Connect + Volume up.
I have not tried it, but some sources say it is for exiting firmware update mode. So, no high hopes, but it's worth a try.