Skip to main content
Help

Current version by: Erik Chimello ,

Title:

Home button doesn't click properly

Text:

Hi! I replaced my iPhone 6S display and I obviously moved the home button from my old screen.

After I reassembled it, I found out that the click was way too hard, so I opened it again and unscrewed one of the screws on the home button bracket. After that, everything was fine.

Just one day later, the home button almost wasn’t clicking. I opened the phone again and the screws were almost completely unscrewed. I screwed them again, wondering how that happened.

After another day, the situation is kind of the same. I’m scared of damaging the button.

The adhesive holding it down on the screen is gone, so I’m thinking about replacing the gasket. Could this be the right solution?

Thanks in advance!

Device:

iPhone 6s

Status:

open

Accepted Answer:

+635638

Original post by: Erik Chimello ,

Title:

Home button doesn't click properly

Text:

Hi! I replaced my iPhone 6S display and I obviously moved the home button from my old screen.

After I reassembled it, I found out that the click was way too hard, so I opened it again and unscrewed one of the screws on the home button bracket. After that, everything was fine.

Just one day later, the home button almost wasn’t clicking. I opened the phone again and the screws were almost completely unscrewed. I screwed them again, wondering how that happened.

After another day, the situation is kind of the same. I’m scared of damaging the button.

The adhesive holding it down on the screen is gone, so I’m thinking about replacing the gasket. Could this be the right solution?

Thanks in advance!

Device:

iPhone 6s

Status:

open