Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Current version by: Seth Rhodes ,

Text:

As mentioned in my comment yesterday, the connector housing and the sockets can be ordered from Digikey. http://www.digikey.com/short/zqq9pf
As mentioned in my comment yesterday, the connector housing and the sockets can be ordered from Digikey. http://www.digikey.com/short/zqq9pf
 
Here is my progress so far on the mod using the pinout described by Aaron Thompson. I designed and 3D printed a little bracket that holds the Anderson connector in place. I was originally going to JB weld this in place, but I plan on redesigning the bracket so that it screws into the same holes that the original PSU was attached to on the frame. Or not. I don’t know. :-P
 
[image|2009676]
 
[image|2009673]
 
[image|2009675]

Status:

open

Original post by: Seth Rhodes ,

Text:

As mentioned in my comment yesterday, the connector housing and the sockets can be ordered from Digikey.

Here is my progress so far on the mod using the pinout described by Aaron Thompson. I designed and 3D printed a little bracket that holds the Anderson connector in place. I was originally going to JB weld this in place, but I plan on redesigning the bracket so that it screws into the same holes that the original PSU was attached to on the frame. Or not. I don’t know. :-P

[image|2009676]

[image|2009673]

[image|2009675]

Status:

open