Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help

Current version by: B Mac ,

Text:

See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (LateEarly 2009) to a monitor. The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply. (unless you can figure out how to make the original PSU work…)
See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (LateEarly 2009) to a monitor. The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply. (unless you can figure out how to make the original PSU work…)

Status:

open

Original post by: B Mac ,

Text:

See https://pbase.com/brucemac/2019octdisplay for my successful conversion from a 24” iMac (Late 2009) to a monitor.  The inverter board is built into this display, but you’ll need 24Vdc to drive it - Thus, you’ll need a power supply.  (unless you can figure out how to make the original PSU work…)

Status:

open