Skip to main content

Fix Your Stuff

Right to Repair



Original post by: Connie Simila ,


I had the same issue.  The pump drain was clogged with a cloth napkin and bobby pins. It is located on the front in the small panel bottom left side.  Since mine stopped before spinning the machine was full of water. I used the small drain tube on the left (inside the panel) to slowly let out a lot of the water, then had a pan and lots of towels ready for when I opened the filter on the right side in the panel.  As you start to unscrew it out lots more water comes out.  Clean thoroughly and replace.  Did the trick.