Skip to main content
Help

Original post by: Dan ,

Text:

Eve Ann Wallis - This series has a unique issue! Apple moved the microphone hole! And in doing so have messed up a few people. You need to modify the bottom tape with a small cut out so the hole is not covered. Here’s the location of the microphone hole:

[image|1705221]

At this point you should get another adhesive tape kit and after fully cleaning the old tapes off, modify the new set as needed and give that a go!

But, before you put the display back on check your mic cable is connected properly as outlined in step 57 in this guide and the ribbon cable is not damaged [guide|95631]

Status:

open