Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Current version by: Dan ,

Text:

Surprisingly it’s a bit tricky!
 
Looking at the cover we have a snap action marked in Blue and a slide in tab marked in Green, and lastly a drop in tab marked in Yellow.
 
[image|1695862]
 
Here we can see the mating areas
 
[image|1695858]
 
Here’s a tighter picture of the snap
 
[image|1695864]
 
So to put the bottom cover on you first need to slide the Green Tabs into there sockets along the back edge, then once the alignment of the lid is square you need to seat the Blue snaps by pressing on the cover just above them and lastly press in the mid point Yellow press in tabs.

Status:

open

Original post by: Dan ,

Text:

Surprisingly it’s a bit tricky!

Looking at the cover we have a snap action marked in Blue and a slide in tab marked in Green, and lastly a drop in tab marked in Yellow.

[image|1695862]

Here we can see the mating areas

[image|1695858]

So to put the bottom cover on you first need to slide the Green Tabs into there sockets along the back edge, then once the alignment of the lid is square you need to seat the Blue snaps by pressing on the cover just above them and lastly press in the mid point Yellow press in tabs.

Status:

open