Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help

Original post by: Roger Tucker ,

Text:

Hopefully you have this fixed by now.  I ran into almost the exact same problem.  I replaced my display which requires disconnecting the camera cable.  One of the other responders mentioned that he disconnected the camera cable and the problem went away.  I tried the solution and found that by disconnecting the cable my problem also went away.  On further examination I realized that I had put the cable in upside down, 180 degrees from what it should have been.  I flipped the cable over, plugged it back in and I’m back in business, camera and all.  I feel fortunate that I didn’t do damage by incorrectly plugging the cable in.

Status:

open