Skip to main content
Help

Current version by: Joshua ,

Text:

Hi There!
 
They changed the design between the 7 and the 8. The 8 series no longer has the plastic clips at the top - instead there are two metal “loops” similar to the sides of the display. These are designed to slip into grab points. PleaseIf they are not slipping into the correct points on the housing, that would make the display likely to fall off. Check to see if the loops are bent over or not aligned properly. Oftentimes when we receive new iPhone 8 and 8 Plus displays these metal loops will be bent.

Please
see attached the picture below. I have circled the “loops” in green.
They changed the design between the 7 and the 8. The 8 series no longer has the plastic clips at the top - instead there are two metal “loops” similar to the sides of the display. These are designed to slip into grab points. PleaseIf they are not slipping into the correct points on the housing, that would make the display likely to fall off. Check to see if the loops are bent over or not aligned properly. Oftentimes when we receive new iPhone 8 and 8 Plus displays these metal loops will be bent.

Please
see attached the picture below. I have circled the “loops” in green.
 
Please be sure to reach out if you have further questions - there are a ton of people here willing to help!
 
Cheers!
 
[image|1535305]

Status:

open

Original post by: Joshua ,

Text:

Hi There!

They changed the design between the 7 and the 8. The 8 series no longer has the plastic clips at the top - instead there are two metal “loops” similar to the sides of the display. These are designed to slip into grab points. Please see attached the picture below. I have circled the “loops” in green.

Please be sure to reach out if you have further questions - there are a ton of people here willing to help!

Cheers!

[image|1535305]

Status:

open