Skip to main content
Help

Current version by: Stein Olaf Lund ,

Text:

[image|1504895]
This is the solution that worked for me on an iPhone 7. I had the exact same problem. The touch worked fine outside of the frame, but stopped working as soon as I clicked it in place.
I found out that if I took some transparent 3M tape over the LCD/touch connectors as shown in the picture, it worked fine when installed
+
+Not sure if this works for the iPhone 7 plus though

Status:

open

Edit by: Stein Olaf Lund ,

Text:

[image|1504895]
This is the solution that worked for me on an iPhone 7. I had the exact same problem. The touch worked fine outside of the frame, but stopped working as soon as I clicked it in place.
-I had lost the black tape that originally is used for the connectors (Usually it does not fit anyways), so I found out that if I took some transparent 3M tape over the LCD/touch connectors as shown in the picture, it worked fine when installed
+I found out that if I took some transparent 3M tape over the LCD/touch connectors as shown in the picture, it worked fine when installed

Status:

open

Edit by: Stein Olaf Lund ,

Text:

-[image|1504892]
+[image|1504895]
This is the solution that worked for me on an iPhone 7. I had the exact same problem. The touch worked fine outside of the frame, but stopped working as soon as I clicked it in place.
I had lost the black tape that originally is used for the connectors (Usually it does not fit anyways), so I found out that if I took some transparent 3M tape over the LCD/touch connectors as shown in the picture, it worked fine when installed

Status:

open

Original post by: Stein Olaf Lund ,

Text:

[image|1504892]

This is the solution that worked for me on an iPhone 7. I had the exact same problem. The touch worked fine outside of the frame, but stopped working as soon as I clicked it in place.

I had lost the black tape that originally is used for the connectors (Usually it does not fit anyways), so I found out that if I took some transparent 3M tape over the LCD/touch connectors as shown in the picture, it worked fine when installed

Status:

open