Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Current version by: oldturkey03 (vote details) ,

Title:

iPhone 6 won't start, absorption stuck on 0.06mA

Text:

Hi guys, i've a phone that had a liquid contact and won't start. I've done a quick wash to take off all the oxide. When i plug the bench power supply absorption is 0. When i try to power on it goes stucked to 0.06mA.

I checked principal voltages lines under Nand and cpu/gpu, and it's all ok, only pp_gpu is 0 but is fine because i have not plugged the screen.

I try to change tristar because PP3V3_ACC was 0 but nothing change.

I also see that RESET_1V8_L is every time 0

What also can i do?

Thanks a lot :)

Device:

iPhone 6

Status:

open

Accepted Answer:

463568

Original post by: SmartDoc ,

Title:

iPhone 6 won't start, absorption stuck on 0.06mA

Text:

Hi guys, i've a phone that had a liquid contact and won't start. I've done a quick wash to take off all the oxide. When i plug the bench power supply absorption is 0. When i try to power on it goes stucked to 0.06mA.

I checked principal voltages lines under Nand and cpu/gpu, and it's all ok, only pp_gpu is 0 but is fine because i have not plugged the screen.

I try to change tristar because PP3V3_ACC was 0 but nothing change.

I also see that RESET_1V8_L is every time 0

What also can i do?

Thanks a lot :)

Device:

iPhone 6

Status:

open