Skip to main content

Original post by: oldturkey03 ,


@ctrufitty yes you can. Follow the first 6 steps of this guide [guide|5665] since those are pretty identical to your camera.


After the FRONT COVER UNIT is removed, be sure to discharge the main capacitor installed in the

FINDER/FLASH UNIT with use of a discharging resistor. (Discharging resistor: 1 kΩ, approx. 5W)

Never touch the terminal section of the capacitor.

These instructions are from a slightly different model but are typical of Canon's A-model battery cover assembly.



Since there are not good guides on ifixit for this repair yet, you could create some while you do your repair. That would be really helpful for the next person. Use this guide for that.