Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help

Original post by: oldturkey03 ,

Text:

I am inclined to agree with Jacques Richer, except my preference is to clean the logic board with isopropyl alcohol and a soft brush. LEt it dry and definitely check for any corrosion around the components or your logic board and the cable connectors as well. I am a strong believer in replacing the battery after any water immersion. Probably based on my experience with lithium  and water. So that is where I would start and then revisit the issue as they arise. Good Luck to you.

Status:

open