Help

Current version by: oldturkey03 (vote details) ,

Title:

iPhone 6 water damage repair board

Text:

Hi every one!

The iPhone 6 dropped in a water and will not turn on anymore. I checked and removed the capacitor C5202_RF (smoked / shorted), removed the shields and cleared the board, but the phone still shorted.

The power supply show me 0.050A (50mA) when I connect only the board, but I can not get any component warmup. I tried to use the term paper to help me identify it, but I have no dark points to analyze it.

I checked some capacitors around the power controller, but it was a random test flowing the schematics diagram, but nothing in a short.

Any suggestions for next verification?

Thanks

Felipe

Device:

iPhone 6

Tags:

board repair, short cut, water damage

Status:

open

Accepted Answer:

436439

Original post by: Felipe Kashiwagura ,

Title:

iPhone 6 water damage repair board

Text:

Hi every one!

The iPhone 6 dropped in a water and will not turn on anymore. I checked and removed the capacitor C5202_RF (smoked / shorted), removed the shields and cleared the board, but the phone still shorted.

The power supply show me 0.050A (50mA) when I connect only the board, but I can not get any component warmup. I tried to use the term paper to help me identify it, but I have no dark points to analyze it.

I checked some capacitors around the power controller, but it was a random test flowing the schematics diagram, but nothing in a short.

Any suggestions for next verification?

Thanks

Felipe

Device:

iPhone 6

Tags:

board repair, short cut, water damage

Status:

open