Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Current version by: Minho (vote details) ,

Text:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Status:

deletedopen
deletedopen

Edit by: Minho (vote details) ,

Text:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Status:

opendeleted
opendeleted

Edit by: Minho (vote details) ,

Text:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Status:

deletedopen
deletedopen

Edit by: Minho ,

Text:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Status:

opendeleted
opendeleted

Edit by: oldturkey03 ,

Text:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer. Replacing that will resolve your issue. Don't[https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that. Don't start soldering on the boardsboard until you have properly checked everything else.
Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer. Replacing that will resolve your issue. Don't[https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that. Don't start soldering on the boardsboard until you have properly checked everything else.

Status:

open

Original post by: oldturkey03 ,

Text:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. Don't start soldering on the boards until you have properly checked everything else.

Status:

open