Help

Current version by: Vishal ,

Title:

Why won't my screen work after installation?

Text:

So I changed my LCD for the third time and I usually have no issues while doing it. But this time, the screen wont turn on. I've tried all the usual procedures (hard reset, disconnect battery, ect.)  and itunes does recognize the phone. The screen will turn on, but once I turn the brightness up, the screen shuts off and the phone stays on.  When I shine a light on the screen there is no image, so I believe the backlight is functional. For the most part, the screen does not turn on after connected. I had the connections on the mother board looked at as well, and there is no sign of any bending of pins or ripping of cables.

Device:

iPhone 6s

Status:

open

Accepted Answer:

425125

Original post by: Vishal ,

Title:

Why won't my screen work after installation?

Text:

So I changed my LCD for the third time and I usually have no issues while doing it. But this time, the screen wont turn on. I've tried all the usual procedures (hard reset, disconnect battery, ect.)  and itunes does recognize the phone. The screen will turn on, but once I turn the brightness up, the screen shuts off and the phone stays on.  When I shine a light on the screen there is no image, so I believe the backlight is functional. For the most part, the screen does not turn on after connected. I had the connections on the mother board looked at as well, and there is no sign of any bending of pins or ripping of cables.

Device:

iPhone 6s

Status:

open