Help

Current version by: Michael ,

Text:

@kevkas, Personally, I would try to run a jumper and cover it with a small amount of Solder Mask... Lots of plastic with risk of melting new SIM tray, so add a bit of Low Melt first so you don't have to use a higher temp :)
@kevkas, Personally, I would try to run a jumper and cover it with a small amount of Solder Mask... Lots of plastic with risk of melting new SIM tray, so add a bit of Low Melt first so you don't have to use a higher temp :)
[image|1181161]

Status:

open

Edit by: Michael ,

Text:

Personally@kevkas, Personally, I would try to run a jumper and cover it with a small amount of Solder Mask... if that didn't work, would install a new Sim Card tray. Lots Lots of plastic with risk of melting so add a bit of Low Melt first so you don't have to use a higher temp :)
[image|1181161]
Personally@kevkas, Personally, I would try to run a jumper and cover it with a small amount of Solder Mask... if that didn't work, would install a new Sim Card tray. Lots Lots of plastic with risk of melting so add a bit of Low Melt first so you don't have to use a higher temp :)
[image|1181161]

Status:

open

Original post by: Michael ,

Text:

Personally, I would try to run a jumper and cover it with a small amount of Solder Mask... if that didn't work, would install a new Sim Card tray. Lots of plastic with risk of melting so add a bit of Low Melt first so you don't have to use a higher temp :)

Status:

open