Help

Current version by: Dan ,

Text:

Components which have a covering over them are either sensitive to moisture in the air or have high enough voltages which can short out the component or other nearby logic.
 
As an example a [https://en.wikipedia.org/wiki/MOSFET|MOSFET] has a low & high voltage side which if shorted can burn it out.
 
It's important to re-recover them with the correct sealer as you don't want something that can'tcan be removed later if needed, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds. UV masking material also works its tends to be on the thinner side and a bit more expensive.
It's important to re-recover them with the correct sealer as you don't want something that can'tcan be removed later if needed, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds. UV masking material also works its tends to be on the thinner side and a bit more expensive.
 
Tip: store your unused tube in a metallic antistatic bag which is UV opaque.

Status:

open

Edit by: Dan ,

Text:

Components which have a covering over them are either sensitive to moisture in the air or have high enough voltages which can short out the component or other nearby logic.
 
As an example a [https://en.wikipedia.org/wiki/MOSFET|MOSFET] has a low & high voltage side which if shorted can burn it out.
 
It's important to re-recover them with the correct sealer as you don't want something that can't be removed later if needed, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds. UV masking material also works its tends to be on the thinner side and a bit more expensive.
 
Tip: store your unused tube in a darkmetallic antistatic bag which is UV opaque.
Tip: store your unused tube in a darkmetallic antistatic bag which is UV opaque.

Status:

open

Edit by: Dan ,

Text:

Components which have a covering over them are either sensitive to moisture in the air or have high enough voltages which can short out the component or other nearby logic.
 
As an example a [https://en.wikipedia.org/wiki/MOSFET|MOSFET] has a low & high voltage side which if shorted can burn it out.
 
It's important to re-recover them with the correct sealer as you don't want something that can't be removed later if needed, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds. UV masking material also works its tends to be on the thinner side and a bit more expensive.

Tip: store your unused tube in a dark antistatic bag which is UV opaque.
It's important to re-recover them with the correct sealer as you don't want something that can't be removed later if needed, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds. UV masking material also works its tends to be on the thinner side and a bit more expensive.

Tip: store your unused tube in a dark antistatic bag which is UV opaque.

Status:

open

Edit by: Dan ,

Text:

Components which have a covering over them are either sensitive to moisture in the air or have high enough voltages which can short out the component or other nearby logic.
 
As an example a [https://en.wikipedia.org/wiki/MOSFET|MOSFET] has a low & high voltage side which if shorted can burn it out.
 
It's important to recoverre-recover them with the correct sealer as you don't want something that can't be removed later if neededneeded, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds.
It's important to recoverre-recover them with the correct sealer as you don't want something that can't be removed later if neededneeded, and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds.

Status:

open

Original post by: Dan ,

Text:

Components which have a covering over them are either sensitive to moisture in the air or have high enough voltages which can short out the component or other nearby logic.

As an example a [https://en.wikipedia.org/wiki/MOSFET|MOSFET] has a low & high voltage side which if shorted can burn it out.

It's important to recover them with the correct sealer as you don't want something that can't be removed later if needed and you want something thats quick! UV gasket material like [https://www.panacol.com/fileadmin/pdfs/Vitralit-FIPG60102-english-TDS-Panacol-adhesive.pdf|Vitralit FIPG 60102] is a good choice. Using a UV light cures it within seconds.

Status:

open