Skip to main content

Fix Your Stuff

Right to Repair

Store

Help

Current version by: Felix ,

Title:

Ipad mini LCD making contact with digitizer after replacing both

Text:

After replacing the LCD and Digitizer in an Ipad Mini, the two new parts are making contact, creating the illusion of liquid in the device when the Ipad is sealed up. I am using the same adhesive I have been using on ipad mini's for the past 3 years or so, and I have tried 2 different LCD's. I cannot find anything under the LCD that would be causing it to sit higher than it should, and there is no damage to the frame that would cause the digitizer to sit closer to the LCD. This is the first time in probably hundreds of ipad repairs I've seen this issue on an Ipad mini.

Anyone have any experience with this problem? I'm sure I'm missing something super simple...

Device:

iPad Mini Wi-Fi

Status:

open

Accepted Answer:

397632

Original post by: Felix ,

Title:

Ipad mini LCD making contact with digitizer after replacing both

Text:

After replacing the LCD and Digitizer in an Ipad Mini, the two new parts are making contact, creating the illusion of liquid in the device when the Ipad is sealed up. I am using the same adhesive I have been using on ipad mini's for the past 3 years or so, and I have tried 2 different LCD's. I cannot find anything under the LCD that would be causing it to sit higher than it should, and there is no damage to the frame that would cause the digitizer to sit closer to the LCD. This is the first time in probably hundreds of ipad repairs I've seen this issue on an Ipad mini.

Anyone have any experience with this problem? I'm sure I'm missing something super simple...

Device:

iPad Mini Wi-Fi

Status:

open