Current version by: Mike ali , 12/08/2020

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

456788

Edit by: Mike ali , 07/02/2020

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Edit by: Mike ali , 07/02/2020

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Edit by: Mike ali , 07/02/2020

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Edit by: Mike ali , 07/02/2020

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Edit by: Mike ali , 07/02/2020

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Edit by: Ben , 11/08/2018

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Edit by: oldturkey03 (vote details) , 09/24/2018

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open

Accepted Answer:

Original post by: Mike ali , 04/19/2017

Title:

After replaced pro 4 LCD,won't turn on on battery mode unless plug it

Text:

After i replaced pro 4 LCD , won't turn on on  battery mode unless plug it.

Before i take off the broken screen the pro was working good only screen was broken, so i shutted down and start working on it , after i take off the old screen i tried to connect the new screen on to try it but no response at all.

it does only work when i plug it by the charger and it does shows me that the battery is 100% full on the screen  ?

and also i did put piece of paper between the connects part for the battery and motherboard and it does shows me X on the battery on the screen when i turn it on

but i couldn't solve the problem since 1 week and i'v been searching online but no one had these issue before .

so how can ifixit ??

Device:

Microsoft Surface Pro 4

Status:

open