Skip to main content
Help

Current version by: Sebastian ,

Title:

Touch ID fails, double tap works

Text:

Hi everyone!

After I replaced the screen (screen only) on my iPhone 6S, the Touch ID fails - even though the double tap for one-handed mode works.

I already transfered the small conductive plate beneath the connector (like described in [post|226144]) and took everything apart and reassemled it plus did a factory reset and disconnected the battery.

I was very gently while transferring the home button to the new screen - there is absolutely no optical damage.

What would be the next, you would try?

Could it be a problem, that I used the phone for testing purposes with another display and home button for some time?

Thanks for your help in advance.

Device:

iPhone 6s

Status:

open

Accepted Answer:

+355046

Edit by: Sebastian ,

Title:

Touch ID fails, double tap works

Text:

Hi everyone!

After I replaced the screen (screen only) on my iPhone 6S, the Touch ID fails - even though the double tap for one-handed mode works.

I already transfered the small conductive plate beneath the connector (like described in [post|226144]) and took everything apart and reassemled it plus did a factory reset and disconnected the battery.

I was very gently while transferring the home button to the new screen - there is absolutely no optical damage.

What would be the next, you would try?

Could it be a problem, that I used the phone for testing purposes with another display and home button for some time?

Thanks for your help in advance.

Device:

iPhone 6s

Status:

open

Accepted Answer:

-355046

Edit by: Sebastian ,

Title:

Touch ID fails, double tap works

Text:

Hi everyone!

After I replaced the screen (screen only) on my iPhone 6S, the Touch ID fails - even though the double tap for one-handed mode works.

I already transfered the small conductive plate beneath the connector (like described in [post|226144]) and took everything apart and reassemled it plus did a factory reset and disconnected the battery.

I was very gently while transferring the home button to the new screen - there is absolutely no optical damage.

What would be the next, you would try?

Could it be a problem, that I used the phone for testing purposes with another display and home button for some time?

Thanks for your help in advance.

Device:

iPhone 6s

Status:

open

Accepted Answer:

+355046

Original post by: Sebastian ,

Title:

Touch ID fails, double tap works

Text:

Hi everyone!

After I replaced the screen (screen only) on my iPhone 6S, the Touch ID fails - even though the double tap for one-handed mode works.

I already transfered the small conductive plate beneath the connector (like described in [post|226144]) and took everything apart and reassemled it plus did a factory reset and disconnected the battery.

I was very gently while transferring the home button to the new screen - there is absolutely no optical damage.

What would be the next, you would try?

Could it be a problem, that I used the phone for testing purposes with another display and home button for some time?

Thanks for your help in advance.

Device:

iPhone 6s

Status:

open