Skip to main content
Help

Original post by: dyvan ,

Title:

iPhone 5S screen goes black

Text:

I just did a front display assembly install and everything works fine (camera , touchID, vibrate , buttons, no dead spots etc..) *except* the following:

It looks like the top edge is not completely flush with the metal frame like the other edges.

When I gently push the glass from either top corner to try to make it flush, the screen goes black (while device remains powered-on) .

In other words, I only get a picture when the top edge is not flush with the frame.

Any ideas?

Device:

iPhone 5s

Status:

open