Skip to main content
Help

Original post by: danielteeny ,

Text:

yep, unscrew the screws holding the screen in,

(There were 2 at the bottom edge and a couple on the back when you tilt it out... )

Then remove the loose(ish) plastic pieces below the back metal plate...

After which, two orange circuit straps..?(not sure what to call them) which connect the screen to the camera body will be revealed.

Remove with tweezers.

Then use said tweezers to insert circuit straps from the replacement screen & proceed to replace the plastic pieces, metal plate & screws.

Voila!

Status:

open