Skip to main content

Fix Your Stuff

Right to Repair



Original post by: David ,


I had the same problem. Water left in diswasher after the normal wash cycle. When I ran the rinse cycle the water pumped out.  What was happening  was my GE dishwasher was draining out after the wash cycle but the water inlet valve was letting water back in.  So when I let it run through the wash cycle I would check it a little while after it complete the cycle. The clean light was on and the water came back in through the intake valve.  When I run the rinse cycle the water still pumps out but if I leave the DW set for 15 minutes with the door open the water,comes back.  I need a new intake valve.