Help

Original post by: Elbeeyou ,

Text:

Finally it worked again so I did not had to tear it down... until recently...

Now the wheel has become difficult to turn. It is certainly tired...

As I'm now decided to replace my mouse, I tried to open it by all means and the good news is that I discovered that the rivet (I mentioned) is a torx screw T6. The bad news is that it's not the only screw, there are two other placed under the front Teflon pad.  Then I had to raise the extremities of the pad to access to the screws and I reached not to remove completely the pad.

Status:

open