Skip to main content
Help

Original post by: Hubert Schermele ,

Text:

The problem is as follows. The lcd is mounted on a frame, which is glued in the Outer aluminium case. The frame is screwed  to the Outer case at THE bottom near THE hinges. This construction isn't strong enough for THE torsion created by opening en closing the screen assembly. I tried to epoxy glue THE frame to THE outer case, but this wasn't strong enough. Now i drilled 4 holes through the outer case into THE frame at both sides beside the hinges and made m3 threat, screwed m3 screws in. Done, not really beatifull, but strong. My next step Will be grining the screwheads and welding them with durafix after...

Status:

open