Skip to main content
Help

Current version by: Olivia Breazeale ,

Text:

The main reasonfirst thing you are getting a high number of false alert might be becauseshould try is resetting the settings and channels ofdisplay brightness; you can do this by pressing the Detector are incorrectly adjusted. The factory setting forDim button. When you hear two beeps after pressing the device is Highway Modebutton, the display has been returned to full brightness. If it doesn’t work, you change your settingmay need to City Mode,replace the device picks up only stronger signals. To change modes, press and release the city button; when the letter “c” appears on the screen, your Detector will be in city settings. The POP mode sensor is also very sensitive, so limiting your use to highway and rural driving should reduce the numberscreen of false alerts. To turn on and off the POP mode, press the Dim and City buttons at the same time for four seconds; two beeps mean it is on and one beep means it is off. ForSPX 5300 Radar Laser Detector. For more help visit the [[Cobra SPX 5300 Troubleshooting|troubleshooting page]].
The main reasonfirst thing you are getting a high number of false alert might be becauseshould try is resetting the settings and channels ofdisplay brightness; you can do this by pressing the Detector are incorrectly adjusted. The factory setting forDim button. When you hear two beeps after pressing the device is Highway Modebutton, the display has been returned to full brightness. If it doesn’t work, you change your settingmay need to City Mode,replace the device picks up only stronger signals. To change modes, press and release the city button; when the letter “c” appears on the screen, your Detector will be in city settings. The POP mode sensor is also very sensitive, so limiting your use to highway and rural driving should reduce the numberscreen of false alerts. To turn on and off the POP mode, press the Dim and City buttons at the same time for four seconds; two beeps mean it is on and one beep means it is off. ForSPX 5300 Radar Laser Detector. For more help visit the [[Cobra SPX 5300 Troubleshooting|troubleshooting page]].

Status:

open

Original post by: Olivia Breazeale ,

Text:

The main reason you are getting a high number of false alert might be because the settings and channels of the Detector are incorrectly adjusted. The factory setting for the device is Highway Mode. If you change your setting to City Mode, the device picks up only stronger signals. To change modes, press and release the city button; when the letter “c” appears on the screen, your Detector will be in city settings. The POP mode sensor is also very sensitive, so limiting your use to highway and rural driving should reduce the number of false alerts. To turn on and off the POP mode, press the Dim and City buttons at the same time for four seconds; two beeps mean it is on and one beep means it is off.  For more help visit the [[Cobra SPX 5300 Troubleshooting|troubleshooting page]].

Status:

open