Skip to main content
Help

Current version by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely, the brakes could be locked in place or the wheels could be installed incorrectly.
 
If the brakes are locking the rear wheels in place, unlock the brakes by pushing the brake lever upwards.
 
If the front or rear wheels were installed incorrectly, reinstall them with either this [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Front+Wheel+Replacement/51071|frontguide|51071|front wheel repair guide] [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Rear+Wheels+Replacement/51409|rearor [guide|51409|rear wheel repair guide].
If the front or rear wheels were installed incorrectly, reinstall them with either this [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Front+Wheel+Replacement/51071|frontguide|51071|front wheel repair guide] [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Rear+Wheels+Replacement/51409|rearor [guide|51409|rear wheel repair guide].

Status:

open

Edit by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely, therethe brakes could be a couple reasons:locked in place or the wheels could be installed incorrectly.
If the front or rear wheels are not spinning freely, therethe brakes could be a couple reasons:locked in place or the wheels could be installed incorrectly.
 
If the brakes are locking the rear wheels in place, simply unlock the brakes by pushing the brake lever upwards.
If the brakes are locking the rear wheels in place, simply unlock the brakes by pushing the brake lever upwards.
 
If the front or rear wheels were installed incorrectly, unattach and then reattach both sets of wheels by pressing the buttons located on thereinstall them with either this [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Front+Wheel+Replacement/51071|front wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into positionrepair guide] [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Rear+Wheels+Replacement/51409|rear wheel repair guide].
If the front or rear wheels were installed incorrectly, unattach and then reattach both sets of wheels by pressing the buttons located on thereinstall them with either this [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Front+Wheel+Replacement/51071|front wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into positionrepair guide] [https://www.ifixit.com/Guide/Graco+Snugrider+Elite+Rear+Wheels+Replacement/51409|rear wheel repair guide].

Status:

open

Edit by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely, there could be a couple reasons:
 
* TheIf the brakes may beare locking the rear wheels in placeplace, simply unlock the brakes by pushing the brake lever upwards.
* TheIf the brakes may beare locking the rear wheels in placeplace, simply unlock the brakes by pushing the brake lever upwards.
 
* If this isIf the case, simply unlock the brakes by pushing the brake lever upwards.

* The
front or rear wheels may bewere installed incorrectly.

* If this is the case
incorrectly, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.
* If this isIf the case, simply unlock the brakes by pushing the brake lever upwards.

* The
front or rear wheels may bewere installed incorrectly.

* If this is the case
incorrectly, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.

Status:

open

Edit by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely, there could be a couple reasons:
 
* The brakes may be locking the rear wheels in place.
 
* IfIf this is the case, simply unlock the brakes by pushing the brake lever upwards.
* IfIf this is the case, simply unlock the brakes by pushing the brake lever upwards.
 
* The front or rear wheels may be installed incorrectly.
 
* If this is the case, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.

Status:

open

Edit by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely, there could be a couple reasons:
 
* The brakes may be locking the rear wheels in place.
 
* If this is the case, simply unlock the brakes by pushing the brake lever upwards.
 
* The front or rear wheels may be installed incorrectly.
* If
* If
this is the case, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.
* If
* If
this is the case, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.

Status:

open

Edit by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely, there could be a couple reasons:
 
* The brakes may be locking the rear wheels in place.
* * If If this is the case, simply unlock the brakes by pushing the brake lever upwards.
* * If If this is the case, simply unlock the brakes by pushing the brake lever upwards.
* The front or rear wheels may be installed incorrectly.
* * If If this is the case, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.
* * If If this is the case, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off. To reinstall, lock the wheels into place by sliding them on until the buttons click into position.

Status:

open

Original post by: Melinda Ong ,

Text:

If the front or rear wheels are not spinning freely,  there could be a couple reasons:

* The brakes may be locking the rear wheels in place.
* * If this is the case, simply unlock the brakes by pushing the brake lever upwards.
* The front or rear wheels may be installed incorrectly.
* * If this is the case, unattach and then reattach both sets of wheels by pressing the buttons located on the wheel holders and pulling the wheels off.  To reinstall, lock the wheels into place by sliding them on until the buttons click into position.

Status:

open