Skip to main content
Help

Current version by: Minus ,

Text:

There is a sensor inside that determines the orientation of the screen, it would be around the screen not on the board but attached by cable. It may have come loose during the change over.
 
You will have to open init again to check.
You will have to open init again to check.
 
Good luck.

Status:

open

Original post by: Minus ,

Text:

There is a sensor inside that determines the orientation of the screen, it would be around the screen not on the board but attached by cable. It may have come loose during the change over.

You will have to open in again to check.

Good luck.

Status:

open