Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Help

Original post by: oldturkey03 ,

Text:

Ronnie Rutledge looks straight forward. The ballast is mounted to the optical engine assembly. It might help if you post some pictures of what you are looking at after you removed the back panels. "BALLAST ASSEMBLY REMOVAL

REMOVAL PROCEDURE

1) Remove screw (A) from the Ballast support and screw (B) if the Engine is still mounted in the cabinet.

2) Slide the Ballast Assembly out the rear of the Engine assembly and unplug the Lamp connector (C) at the Ballast.

3) Disconnect connectors CJ1 and CJ3.

4) Remove screw (D) to remove the PWBBALLAST from the Ballast Support.

Reverse the procedure to install a new Ballast ." is what the service guide suggest.

[image|612809]

[image|612810]

Status:

open