Skip to main content
Help

Current version by: Dan ,

Text:

The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use [www.softnology.biz/tips_macbookpro.html|Thaiphoonhttp://www.softnology.biz/tips_macbookpro.html|Thaiphoon Burner] utility.
The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use [www.softnology.biz/tips_macbookpro.html|Thaiphoonhttp://www.softnology.biz/tips_macbookpro.html|Thaiphoon Burner] utility.

Status:

open

Edit by: Dan ,

Text:

The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use [ww.softnology.biz/tips_macbookpro.html|Thaiphoonwww.softnology.biz/tips_macbookpro.html|Thaiphoon Burner] utility.
The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use [ww.softnology.biz/tips_macbookpro.html|Thaiphoonwww.softnology.biz/tips_macbookpro.html|Thaiphoon Burner] utility.

Status:

open

Edit by: Dan ,

Text:

The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use Thaiphoon Burner[ww.softnology.biz/tips_macbookpro.html|Thaiphoon Burner] utility.
The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use Thaiphoon Burner[ww.softnology.biz/tips_macbookpro.html|Thaiphoon Burner] utility.

Status:

open

Original post by: phil brinkle ,

Text:

The problem seems to be related to nvidia's DRAM Controller. Probably you have to change SPD timing to 8-8-8-20 to meet DDR3-1066G specification. To change timings and write them to SPD use Thaiphoon Burner utility.

Status:

open