Skip to main content
Help

Current version by: oldturkey03 ,

Text:

Brian, the starter is located between transmission and engine down intake manifold. Look for number 17 in the diagram
Brian, the starter is located between transmission and engine down intake manifold. Look for number 17 in the diagram
 
[image|287607|align=center]
 
STARTER REMOVAL/INSTALLATION
 
Warning
 
• When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.
 
1. Disconnect the negative battery cable.
 
2. Remove the battery.
 
3. Remove the intake manifold bracket.
 
4. Remove in the order indicated in the table.
 
5. Install in the reverse order of removal.
 
[image|287606|align=center]

Status:

open

Edit by: oldturkey03 ,

Text:

Brian, the starter is located between transmission and engine down intake manifold.
 
[image|287607|align=leftimage|287607|align=center]
[image|287607|align=leftimage|287607|align=center]
 
STARTER REMOVAL/INSTALLATION
 
Warning
 
• When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.
 
1. Disconnect the negative battery cable.
 
2. Remove the battery.
 
3. Remove the intake manifold bracket.
 
4. Remove in the order indicated in the table.
 
5. Install in the reverse order of removal.
 
[image|287606|align=center]

Status:

open

Original post by: oldturkey03 ,

Text:

Brian, the starter is located between transmission and engine down intake manifold.

[image|287607|align=left]

STARTER REMOVAL/INSTALLATION

Warning

• When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.

1. Disconnect the negative battery cable.

2. Remove the battery.

3. Remove the intake manifold bracket.

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

Status:

open