Skip to main content
Help

Current version by: oldturkey03 (vote details) ,

Title:

router is not responding

Text:

problem : router's wifi status  light is on but no wifi signal.

2. Can not connect to router via LAN cable also, on lan serup mode ,routerlogin.net page not available. On ipconfig, device ip :192.168.0.2 but default gateway ip is missing .

3. Ping to 192.168.0.1 is not working

4. Router stopped working after i tried setting it in repeater mode(as acess point to my root dlink router)

Reset to default factory mode is not working.

pls help. Thanks

Device:

Netgear WGR614v9

Status:

open

Accepted Answer:

141463

Edit by: originalmachead and oldturkey03 (vote details) ,

Title:

router is not responding

Text:

problem : router's wifi status  light is on but no wifi signal.

2. Can not connect to router via LAN cable also, on lan serup mode ,routerlogin.net page not available. On ipconfig, device ip :192.168.0.2 but default gateway ip is missing .

3. Ping to 192.168.0.1 is not working

4. Router stopped working after i tried setting it in repeater mode(as acess point to my root dlink router)

Reset to default factory mode is not working.

pls help. Thanks

Device:

Netgear WGR614v9

Status:

open

Accepted Answer:

141542

Edit by: oldturkey03 (vote details) ,

Title:

router is not responding

Text:

problem : router's wifi status  light is on but no wifi signal.

2. Can not connect to router via LAN cable also, on lan serup mode ,routerlogin.net page not available. On ipconfig, device ip :192.168.0.2 but default gateway ip is missing .

3. Ping to 192.168.0.1 is not working

4. Router stopped working after i tried setting it in repeater mode(as acess point to my root dlink router)

Reset to default factory mode is not working.

pls help. Thanks

Device:

Netgear WGR614v9

Status:

open

Accepted Answer:

141542

Edit by: originalmachead ,

Title:

router is not responding

Text:

problem : router's wifi status  light is on but no wifi signal.

2. Can not connect to router via LAN cable also, on lan serup mode ,routerlogin.net page not available. On ipconfig, device ip :192.168.0.2 but default gateway ip is missing .

3. Ping to 192.168.0.1 is not working

4. Router stopped working after i tried setting it in repeater mode(as acess point to my root dlink router)

Reset to default factory mode is not working.

pls help. Thanks

Device:

Netgear WGR614v9

Status:

open

Edit by: originalmachead ,

Title:

router is not responding

Text:

problem : router's wifi status  light is on but no wifi signal.

2. Can not connect to router via LAN cable also, on lan serup mode ,routerlogin.net page not available. On ipconfig, device ip :192.168.0.2 but default gateway ip is missing .

3. Ping to 192.168.0.1 is not working

4. Router stopped working after i tried setting it in repeater mode(as acess point to my root dlink router)

Reset to default factory mode is not working.

pls help. Thanks

Device:

Netgear WGR614v9

Status:

open

Original post by: Puneet ,

Title:

router is not responding

Text:

problem : router's wifi status  light is on but no wifi signal.

2. Can not connect to router via LAN cable also, on lan serup mode ,routerlogin.net page not available. On ipconfig, device ip :192.168.0.2 but default gateway ip is missing .

3. Ping to 192.168.0.1 is not working

4. Router stopped working after i tried setting it in repeater mode(as acess point to my root dlink router)

Reset to default factory mode is not working.

pls help. Thanks

Device:

Netgear WGR614v9

Status:

open