Skip to main content
Help

Original post by: fossil ,

Title:

Replacing the U4 IC TDA2050

Text:

I've narrowed down my problem to a possible burnt IC that keeps blowing the fuse. I was able to remove the panel with the circuit board but in order to replace the IC, I need to get access to the bottom of the board which is held in place by a brace.

How would you go by removing the main brace to get underneath the board so theres space enough to un-solder the old IC (sitting right behind the brace) and replace it?

Device:

Fender Frontman 15r

Status:

open