⟐ Answer accepted April 12, 2026 at 5:14 MST

When Raid configuration was bulit,ensure to set SATA configuration to RAID mode.

Press F1 to run SETUP."

What should I do to solve this problem every time I start the PC?

Solved I changed the bios battery and solved the problem.

Thanks for the reply.

⟐ Answer accepted April 12, 2024 at 6:06 MST

TLDR: Processor, memory, PSU seem fine. MOBO lights up for a split second when PSU is plugged in. Only the CPU light and CPU fan turn on for a split second when I try to turn the system power on.

I’ve been trying to get my custom build to POST for about two weeks and have been running into a series of problems and I would appreciate any help.

Parts List

MOBO: Gigabyte Z370 Aorus Gaming 5

Processor: Intel i7 6700

Memory: 2 x Corsair Vengengance DDR4 LPX 8GB 2400

Graphics: EVGA GeForce GTX 2018

PSU: EVGA SuperNova 850

Storage: Samsung 970 Evo

Heatsink: CoolMaster Hyper 212

When I power the system on, the CPU light flashes on and the CPU fan starts for 0.5 seconds and then the board shuts down. I’ve double checked the motherboard power and CPU power cables. I’ve tried powering it up with just 1 RAM stick installed. I’ve also removed the graphics card. I’ve checked the CPU pins on the socket and they seem fine (although this is my first build). I also tried power it on outside of the case on a cardboard box and got the same results.

When I first connect the PSU to the system all the RGB lights on the motherboard light up for a split second and then turn off. This is different than the CPU check light turning on when I power the system on.

I started out with an old Asus z270e gaming motherboard that my friend couldn’t get to work. I was able to get the CPU and RAM checks to pass and the PSU was supplying steadily on that motherboard but was unable to get it to POST. After being unable to return that motherboard, I upgraded to the Gigabyte Z370 Aorus Gaming 5.

Could this just be another bad motherboard? Is this a CPU problem?

Thank you!

⟐ Commented December 04, 2020 at 7:25 MST

30 to 40 minutes into gameplay, my computer restarts. No blue screen, no indication.

Temps on CPU + GPU are within normal range. Thermal paste has been changed too.

There is no visible sign of damage on the motherboard, or burning odour. Fans operating normally too.

Harddrive has been scanned for bad sectors, but it is completely fine.

**Another thing that happened is, after the comp restarted, I went back into Spyro, and another reset occurred, but this time, the computer fell into a bootloop. I had to turn it off for about an hour before starting it back up. I thought it may have been a thermal issue, but the temps have always been in normal range.

⟐ Answered November 01, 2022 at 23:04 MST

it stops immediately after exiting the game

note:all of the pc parts are new except for one hdd.

could it be a virus? I’m suspecting a cracked game to be the reason , couse when i changed the MB the sound disappeared until I lunched the potential reason.

⟐ Answer accepted April 12, 2026 at 5:14 MST

Motherboard: Asrock B365 PRO4

current OS: Win 10

My OS driive is in GPT format

I have an installed Asrock TMP 2.0 as you can see on the picture below

I've watched tutorials on youtube and tried different things and still can't fix it.

I tried:

I updated the bios to the latest stable version, because it was written that it supports windows 11

I tried those things from the official site of the motherboard and from youtube tutorials

I am desperate, I Don't know what else to do! Can someone help me, please? I really want to install windows 11, and no, I don't want one of those hacked versions of windows from torrent sites.

⟐ Commented March 14, 2025 at 23:19 MST

⟐ Commented April 01, 2026 at 2:14 MST

Just started a build this morning, getting power to board, fans are spinning but it won't post at all, I've taken it apart multiple times and completely reassembled. I'm running on an Asrock b450m motherboard.

Have rinserterd ram multiple times and cleaned it as well.

Any help is much appreciated.

Thanks in advance

⟐ Commented December 17, 2020 at 20:44 MST

⟐ Answer accepted April 12, 2026 at 6:37 MST

Been asked to fix a pc again, it needed a new powersupply so I fitted that. All good, mother in lA picked it up, took it back when they got home something had happened as a stick of ram was out of its slot (lord knows how) now it’s no displaying anything.

I’ve taken the whole pc apart taken out the cmos battery. Replaced everything. And the bios flickered on for a min then selected boot and it returned to no display.

Can’t think of anything apart the mobo is fried, any advice?

⟐ Answer accepted April 12, 2026 at 5:14 MST

I3 10105f

H510m-k

MSI rx580 8gb oc.

First when i didnt install ram my pc booted good but next day it didn't work,

Then i install ram for it, it still not

I tried many ways and when i uninstall the vga it works

Can someone explain why😭

⟐ Answer accepted April 12, 2026 at 5:14 MST

CPU: Ryzen 5 4500

Motherboard: Gigabyte B550 Eagle WIFI6

RAM: OLOY DDR4 RAM 16GB (2x8GB) 3000 MHz CL16 1.35V 288-Pin Desktop Gaming UDIMM (MD4U083016BJDA)

GPU: ASUS GTX 550 Ti(yes yes, I know it’s old, but it should be working as the pc problem persists even when I remove it)

PSU: Thermaltake Smart 650W 80+ Gold Non-modular power supply(it’s an older one)

Case(if needed): Corsair 3500X ARGB

⟐ Answer accepted April 12, 2026 at 5:14 MST

Specs:

Gigabyte B450M DS3H

Ryzen 5 2600

4x8gb 2666MHz RAM (OC to 3200)

XPG Spectrix S40G (where Windows and Opencore lie)

⟐ Answer accepted February 13, 2022 at 11:27 MST

On top of that I’m running into a whea-uncorrectable error. I did the disk check and ram check. Reinstalled windows. Mind you the computer is a prebuilt from nzxt that is maybe a week old.

asrock x570 pg4

pny 3090

64 gb royal

im waiting for nzxt to hit me back.

any ideas?!

⟐ Answer edited June 30, 2021 at 21:34 MST