Introduction
Use this guide to remove or replace the two screws securing the iPhone 14 screen and rear glass.
This guide was created using the A2882 (international) model.
Pentalobe (five-point) screws are a proprietary Apple design, requiring the use of a specialized P2 screwdriver.
What you need
-
-
Power off your iPhone before beginning disassembly.
-
Remove the two 6.8 mm-long pentalobe P2 screws at the bottom edge of the iPhone.
-
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
One other person completed this guide.