Installing Samsung Jack LCD
Installing the Samsung Jack LCD.
http://d3nevzfk7ii3be.cloudfront.net/igi/YPBffWWQos4Xjfjj
Paul Piller
15 minutes
Difficult
Samsung Jack
Use this guide to install a new LCD screen.
Use this guide to install a new LCD screen.
Phillips 00 Screwdriver
Plastic Opening Tools
Spudger
An awesome member of our community made this guide. It is not managed by iFixit staff.
Installing Samsung Jack Battery
Installing Samsung Jack Rear Case
Installing Samsung Jack Antenna
Installing Samsung Jack Speaker
Installing Samsung Jack Motherboard
Slide the battery cover downwards with pressure focused on the center of the cover.
Slide the battery cover downwards with pressure focused on the center of the cover.
Lift the cover off of the phone.
Lift the cover off of the phone.
http://d3nevzfk7ii3be.cloudfront.net/igi/wBK6tLWAubWwCS3w
Grasp the bottom left and right corners of the battery and lift it from its housing.
Grasp the bottom left and right corners of the battery and lift it from its housing.
http://d3nevzfk7ii3be.cloudfront.net/igi/D2rje2VFAkfOCfPp
Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
http://d3nevzfk7ii3be.cloudfront.net/igi/DGWsxCn5Mbi6Exdn
The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.
The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.
Insert the Plastic Opening Tool in between the front and rear cases.
Insert the Plastic Opening Tool in between the front and rear cases.
Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
http://d3nevzfk7ii3be.cloudfront.net/igi/mTQnaTIb1WCV2sGL
http://d3nevzfk7ii3be.cloudfront.net/igi/w2GEhw4F1bW2E5bO
http://d3nevzfk7ii3be.cloudfront.net/igi/45GaT6UL6MJZSR6F
Lift the rear case off of the phone.
Lift the rear case off of the phone.
http://d3nevzfk7ii3be.cloudfront.net/igi/5hMnkoKsKJqdGjPa
Remove the two silver 4.30 mm screws on either side of the antenna using a Phillip's #00 Screwdriver.
Remove the two silver 4.30 mm screws on either side of the antenna using a Phillip's #00 Screwdriver.
http://d3nevzfk7ii3be.cloudfront.net/igi/E6wTFQAM1U1eVrhD
There is a wire under the antenna connecting it to the Motherboard. Do not pull off the antenna just yet.
There is a wire under the antenna connecting it to the Motherboard. Do not pull off the antenna just yet.
Use a spudger to remove the wire connector under the antenna.
Use a spudger to remove the wire connector under the antenna.
http://d3nevzfk7ii3be.cloudfront.net/igi/ITuOvxTdabAaaujV
http://d3nevzfk7ii3be.cloudfront.net/igi/PUGYjOo63Paorp3Y
http://d3nevzfk7ii3be.cloudfront.net/igi/mIUH3WXn4BDObdZW
Remove the two black 7.30 mm screws on the top right and left corners of the Motherboard using a Phillips #00 Screwdriver.
Remove the two black 7.30 mm screws on the top right and left corners of the Motherboard using a Phillips #00 Screwdriver.
Remove the silver 4.50 mm screw located below the speaker using a Phillips #00 Screwdriver.
Remove the silver 4.50 mm screw located below the speaker using a Phillips #00 Screwdriver.
http://d3nevzfk7ii3be.cloudfront.net/igi/vVrJEylQHfhZZ6kJ
Use the spudger to detach the speaker ribbon cable.
Use the spudger to detach the speaker ribbon cable.
http://d3nevzfk7ii3be.cloudfront.net/igi/hLcpPy5vqpdjkYva
http://d3nevzfk7ii3be.cloudfront.net/igi/iqfiQWFUyWRDeteK
Lift the speaker out of its compartment.
Lift the speaker out of its compartment.
http://d3nevzfk7ii3be.cloudfront.net/igi/SAvIjk6aklCmDQs1
Remove the power and volume buttons on the right side of the Motherboard.
Remove the power and volume buttons on the right side of the Motherboard.
http://d3nevzfk7ii3be.cloudfront.net/igi/xrOONG511b3GFiKZ
Use a spudger to detach the camera ribbon cable.
Use a spudger to detach the camera ribbon cable.
Lift the camera off of the Motherboard.
Lift the camera off of the Motherboard.
http://d3nevzfk7ii3be.cloudfront.net/igi/tBAthIIRBnuiY4vF
http://d3nevzfk7ii3be.cloudfront.net/igi/AZJvTkYsWcCJ3bmA
Use a spudger to disconnect the white antenna wire on the bottom right corner of the Motherboard.
Use a spudger to disconnect the white antenna wire on the bottom right corner of the Motherboard.
http://d3nevzfk7ii3be.cloudfront.net/igi/eOqBVIT1yDEIvWbN
http://d3nevzfk7ii3be.cloudfront.net/igi/vhB6S5nssYY3yynB
Use a Plastic Opening Tool to lift the flaps of the ZIF connectors to release the ribbon cables near the bottom of the Motherboard.
Use a Plastic Opening Tool to lift the flaps of the ZIF connectors to release the ribbon cables near the bottom of the Motherboard.
Use a spudger to carefully pull the ribbon cables away from the ZIF connectors.
Use a spudger to carefully pull the ribbon cables away from the ZIF connectors.
http://d3nevzfk7ii3be.cloudfront.net/igi/kyuViBLBfcIFaPJJ
http://d3nevzfk7ii3be.cloudfront.net/igi/TtrqxuH2SJAOVGdG
http://d3nevzfk7ii3be.cloudfront.net/igi/RTYlqAjhFjHPJN43
There is a ribbon cable under the Motherboard connecting it to the LCD. Do not pull off the Motherboard just yet.
There is a ribbon cable under the Motherboard connecting it to the LCD. Do not pull off the Motherboard just yet.
Insert the Plastic Opening Tool under the upper left corner of the Motherboard to help reveal the ribbon cable.
Insert the Plastic Opening Tool under the upper left corner of the Motherboard to help reveal the ribbon cable.
Use a spudger to disconnect the Motherboard ribbon cable.
Use a spudger to disconnect the Motherboard ribbon cable.
http://d3nevzfk7ii3be.cloudfront.net/igi/LqEBnxfHWeJTMt2p
http://d3nevzfk7ii3be.cloudfront.net/igi/XByZAIR2HEqUsaqW
Lift the Motherboard off of the phone.
Lift the Motherboard off of the phone.
http://d3nevzfk7ii3be.cloudfront.net/igi/iEgRt2WIk1NMenMv
The LCD frame is firmly attached to the phone with clips. Do not be afraid to use a little extra force.
The LCD frame is firmly attached to the phone with clips. Do not be afraid to use a little extra force.
Insert the Plastic Opening Tool between the LCD frame and the front case of the phone.
Insert the Plastic Opening Tool between the LCD frame and the front case of the phone.
Slide the Plastic Opening Tool around the LCD frame to detach all of the clips.
Slide the Plastic Opening Tool around the LCD frame to detach all of the clips.
http://d3nevzfk7ii3be.cloudfront.net/igi/GgghO6IuHsOjuhtX
http://d3nevzfk7ii3be.cloudfront.net/igi/5oCuLdGSGTEBrEOA
http://d3nevzfk7ii3be.cloudfront.net/igi/V6j6PAicfOpVIsAJ
Lift up the LCD frame.
Lift up the LCD frame.
http://d3nevzfk7ii3be.cloudfront.net/igi/YOXjJj2ujrrdcFlA
http://d3nevzfk7ii3be.cloudfront.net/igi/RQLPUWYHwMupxt3B
There is a hanging ribbon cable connected to the LCD screen that passes through the LCD frame.
There is a hanging ribbon cable connected to the LCD screen that passes through the LCD frame.
Insert the spudger under the bottom left corner of the LCD screen.
Insert the spudger under the bottom left corner of the LCD screen.
Use the spudger to gently pry the LCD screen out of its frame.
Use the spudger to gently pry the LCD screen out of its frame.
Gently remove the screen from the frame.
Gently remove the screen from the frame.
http://d3nevzfk7ii3be.cloudfront.net/igi/XdcOj1ZJkcRG6EJU
http://d3nevzfk7ii3be.cloudfront.net/igi/G2GF3CcvTwJAo3Cn
http://d3nevzfk7ii3be.cloudfront.net/igi/O6sp2qZNZogMKKLo
To reassemble your device, follow these instructions in reverse order.