Repairing LG1010 Speaker

How to replace the speaker in a LG1010 cellular phone.

http://d3nevzfk7ii3be.cloudfront.net/igi/hDSkSSjERdjZHtHE Nicholas Schmidt 5 to 10 minutes Moderate LG 1010

Tools

Small Flathead Screwdriver T6 Torx Screwdriver Embrace your inner English teacher and help improve this guide's grammar! Help make this guide better by using the correct tools in images and/or text. This guide is missing information on how to start the process. Make a prerequisite guide! An awesome member of our community made this guide. It is not managed by iFixit staff. Remove the two plastic screw covers below the inside phone screen. Remove the two plastic screw covers below the inside phone screen. http://d3nevzfk7ii3be.cloudfront.net/igi/aAUgBOMZLXrAo6cY http://d3nevzfk7ii3be.cloudfront.net/igi/MgWMmNtsdmyipkIt Unscrew both screws using a Torx T6 screwdriver. Unscrew both screws using a Torx T6 screwdriver. http://d3nevzfk7ii3be.cloudfront.net/igi/yZMtFwlIfFtjx1Ct Pry off screen front cover with a straight 3mm screwdriver. Pry off screen front cover with a straight 3mm screwdriver. http://d3nevzfk7ii3be.cloudfront.net/igi/hVMxEULSjOo53qga http://d3nevzfk7ii3be.cloudfront.net/igi/IdJZgXsCaYbPZF3y http://d3nevzfk7ii3be.cloudfront.net/igi/ZFNaPXmHOsOa5hOJ Pry off the speaker which is glued on to the front cover using a Small Flathead Screwdriver. Pry off the speaker which is glued on to the front cover using a Small Flathead Screwdriver. http://d3nevzfk7ii3be.cloudfront.net/igi/Wg6pSIFG6wKJSE3G http://d3nevzfk7ii3be.cloudfront.net/igi/RlCLomI6IJOpYcLB http://d3nevzfk7ii3be.cloudfront.net/igi/dqsIQEOLicUCrJSc Unsolder the black and red wires of the speaker from where they are attached to the base of the screen. Unsolder the black and red wires of the speaker from where they are attached to the base of the screen. http://d3nevzfk7ii3be.cloudfront.net/igi/xbaHeRHmfBQd4LTl Obtain replacement speaker and solder the new black and red wires back onto base of the screen. Obtain replacement speaker and solder the new black and red wires back onto base of the screen. http://d3nevzfk7ii3be.cloudfront.net/igi/luaC5OPUhBooxjDa Apply glue to the back of the speaker and place it back in its original position. Apply glue to the back of the speaker and place it back in its original position. http://d3nevzfk7ii3be.cloudfront.net/igi/qT4p66AERV1g1F2Q

To reassemble your device, follow these instructions in reverse order.