<?xml version="1.0" encoding="UTF-8"?>
<procedure locale="en" xmlns="http://omanual.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://omanual.com/openmanual_0.2.xsd">
   <title>Installing iPod 1st Generation Front Panel</title>
   <summary />
   <image>http://d3nevzfk7ii3be.cloudfront.net/igi/Ed2WILLjOZS4yGxs</image>
   <author id="1">iRobot</author>
   <time_required />
   <difficulty>Moderate</difficulty>
   <categories>
      <category>iPod 1st Generation</category>
   </categories>
   <introduction><p>The plastic front half of your iPod case.</p></introduction>
   <introduction_rendered><p>The plastic front half of your iPod case.</p><div class="parts"><strong>Relevant parts</strong><ul><li><a href="http://www.ifixit.com/iPod-Parts/iPod-1G-Front-Panel/IF190-004">iPod 1G Front Panel</a></li></ul></div><div class="tools"><strong>Tools</strong><ul><li><a href="http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000">Plastic Opening Tools</a></li><li><a href="http://www.ifixit.com/Tools/T6-Torx-Screwdriver/IF145-004">T6 Torx Screwdriver</a></li></ul></div></introduction_rendered>
   <tools>
      <tool notes="" thumbnail="http://da2lh5cs8ikqj.cloudfront.net/cart-products/kDMlRd6QFSgQpqCw.mini" url="http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000">Plastic Opening Tools</tool>
      <tool notes="" thumbnail="http://da2lh5cs8ikqj.cloudfront.net/cart-products/PhlmZP1ADNHLDFBM.mini" url="http://www.ifixit.com/Tools/T6-Torx-Screwdriver/IF145-004">T6 Torx Screwdriver</tool>
   </tools>
   <parts>
      <part notes="" thumbnail="" url="http://www.ifixit.com/iPod-Parts/iPod-1G-Front-Panel/IF190-004">iPod 1G Front Panel</part>
   </parts>
   <flags />
   <documents />
   <prerequisites>
      <prerequisite id="364" locale="en" path="/Installing-Rear-Panel-364/procedure.xml">Installing iPod 1st Generation Rear Panel</prerequisite>
      <prerequisite id="366" locale="en" path="/Installing-Hard-Drive-366/procedure.xml">Installing iPod 1st Generation Hard Drive</prerequisite>
   </prerequisites>
   <steps>
      <step number="0" title="">
         <lines>
            <line bullet="icon_note" level="0">Before opening your iPod, ensure that the hold switch is in the locked position.
               <text_raw>Before opening your iPod, ensure that the hold switch is in the locked position.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/6lqheOBIibX1AgVi</image>
         </images>
      </step>
      <step number="1" title="">
         <lines>
            <line bullet="icon_note" level="0">Opening the iPod can be challenging; don&apos;t get discouraged if it takes you a few tries to get the iPod to open.
               <text_raw>Opening the iPod can be challenging; don&apos;t get discouraged if it takes you a few tries to get the iPod to open.</text_raw>
            </line>
            <line bullet="black" level="0">Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you&apos;ve inserted the tool, run it along the seam to free the five tabs holding the iPod together.
               <text_raw>Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you&apos;ve inserted the tool, run it along the seam to free the five tabs holding the iPod together.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/yRvFEGPAtLkFCTD4</image>
         </images>
      </step>
      <step number="2" title="">
         <lines>
            <line bullet="black" level="0">Continue to run the opening tool along the side of the case until all five tabs have been released.
               <text_raw>Continue to run the opening tool along the side of the case until all five tabs have been released.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/FiovVlZJVfmVGVA5</image>
         </images>
      </step>
      <step number="3" title="">
         <lines>
            <line bullet="black" level="0">Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.
               <text_raw>Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/RKKlMT1bJjHAxOpY</image>
         </images>
      </step>
      <step number="4" title="">
         <lines>
            <line bullet="black" level="0">Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.
               <text_raw>Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.</text_raw>
            </line>
            <line bullet="black" level="0">Lift the rear panel away from the iPod.
               <text_raw>Lift the rear panel away from the iPod.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/lc4mwqSSoo6OwvAZ</image>
         </images>
      </step>
      <step number="5" title="">
         <lines>
            <line bullet="black" level="0">Lift the battery up from the adhesive holding it to the iPod.
               <text_raw>Lift the battery up from the adhesive holding it to the iPod.</text_raw>
            </line>
            <line bullet="black" level="0">Lay the battery next to the iPod (it is still connected to the logic board).
               <text_raw>Lay the battery next to the iPod (it is still connected to the logic board).</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/PcnlFXER1KMYgsWu</image>
         </images>
      </step>
      <step number="6" title="">
         <lines>
            <line bullet="black" level="0">Carefully disconnect the orange ribbon cable from the hard drive.
               <text_raw>Carefully disconnect the orange ribbon cable from the hard drive.</text_raw>
            </line>
            <line bullet="black" level="0">If the cable doesn&apos;t come free easily, it may be helpful to gently wiggle the cable from side to side.
               <text_raw>If the cable doesn&apos;t come free easily, it may be helpful to gently wiggle the cable from side to side.</text_raw>
            </line>
            <line bullet="black" level="0">Lift the hard drive out of the iPod.
               <text_raw>Lift the hard drive out of the iPod.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/NbtY6RE4R2KIgY2n</image>
         </images>
      </step>
      <step number="7" title="">
         <lines>
            <line bullet="black" level="0">Carefully disconnect the white battery connector from the logic board. Be sure to pull only on the connector itself and not on the cables.
               <text_raw>Carefully disconnect the white battery connector from the logic board. Be sure to pull only on the connector itself and not on the cables.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/Ed2WILLjOZS4yGxs</image>
         </images>
      </step>
      <step number="8" title="">
         <lines>
            <line bullet="black" level="0">Peel up the gray rubber bumper near the hard drive ribbon to reveal the T6 Torx screw beneath.
               <text_raw>Peel up the gray rubber bumper near the hard drive ribbon to reveal the T6 Torx screw beneath.</text_raw>
            </line>
            <line bullet="black" level="0">Remove the newly revealed T6 Torx screw.
               <text_raw>Remove the newly revealed T6 Torx screw.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/VxcMGiLGBeIvVOFP</image>
         </images>
      </step>
      <step number="9" title="">
         <lines>
            <line bullet="black" level="0">Remove the 3 remaining T6 Torx screws from the logic board.
               <text_raw>Remove the 3 remaining T6 Torx screws from the logic board.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/CUCPCJyXuIIvVj1U</image>
         </images>
      </step>
      <step number="10" title="">
         <lines>
            <line bullet="black" level="0">Slide the logic board away from the port end of the casing and lift it out of the iPod.
               <text_raw>Slide the logic board away from the port end of the casing and lift it out of the iPod.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/cHFLoCCsXfRk4444</image>
         </images>
      </step>
      <step number="11" title="">
         <lines>
            <line bullet="black" level="0">Front panel remains.
               <text_raw>Front panel remains.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/QsF2JHoTeq5wraCd</image>
         </images>
      </step>
   </steps>
   <conclusion><p>To reassemble your device, follow these instructions in reverse order.</p></conclusion>
</procedure>

