<?xml version="1.0" encoding="UTF-8"?>
<procedure locale="en" xmlns="http://www.ifixit.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.ifixit.com/api/0.1/doc/guide.xsd">
   <title>Repairing 1999-2004 Honda Odyssey Rear window actuator</title>
   <summary>Quit replacing the rear window actuators at ~$200 to $300 each time they fail.</summary>
   <image>http://d3nevzfk7ii3be.cloudfront.net/igi/ysGRtLUhqEqcQCFf</image>
   <author id="243484">Marvin</author>
   <time_required>Actuator modification 30 to 45 minutes for both.  Removal and reinstallation time will vary with experience ~1.5 hours each side</time_required>
   <difficulty>Difficult</difficulty>
   <categories>
      <category>1999-2004 Honda Odyssey</category>
   </categories>
   <introduction><p>The actuator failure occurs due to faulty design.  Apparently replacement actuators are no better than the originals as they continue to fail.  I did this to my Odyssey several years ago after both rear window actuators failed within months of each other.  I have not had a single failure since applying this fix.</p></introduction>
   <introduction_rendered><p>The actuator failure occurs due to faulty design.  Apparently replacement actuators are no better than the originals as they continue to fail.  I did this to my Odyssey several years ago after both rear window actuators failed within months of each other.  I have not had a single failure since applying this fix.</p><div class="parts"><strong>Relevant parts</strong><ul><li><a href="http://www.ifixit.com/Item/1_2%22_heat_shrink_3%22_long">1/2&amp;quot; heat shrink 3&amp;quot; long</a></li><li><a href="http://www.ifixit.com/Item/2%27_18_gauge_high_temperature_insulation_stranded_wire">2&amp;apos; 18 gauge high temperature insulation stranded wire</a></li><li><a href="http://www.ifixit.com/Item/Rosin_core_solder">Rosin core solder</a></li><li><a href="http://www.ifixit.com/Item/Two_pack_of_194LL_turn_signal_marker_lamps">Two pack of 194LL turn signal/marker lamps</a></li></ul></div><div class="tools"><strong>Tools</strong><ul><li><a href="http://www.ifixit.com/Item/Flat_Head_ScrewDriver">Flat Head ScrewDriver</a></li><li><a href="http://www.ifixit.com/Tools/Large-Needle-Nose-Pliers/IF145-024">Needle Nose Pliers</a></li><li><a href="http://www.ifixit.com/Tools/Soldering-Kit/IF145-018">Soldering Iron</a></li><li><a href="http://www.ifixit.com/Item/phillips_screwdriver">phillips screwdriver</a></li></ul></div></introduction_rendered>
   <tools>
      <tool notes="" thumbnail="" url="http://www.ifixit.com/Item/Flat_Head_ScrewDriver">Flat Head ScrewDriver</tool>
      <tool notes="" thumbnail="" url="http://www.ifixit.com/Tools/Large-Needle-Nose-Pliers/IF145-024">Needle Nose Pliers</tool>
      <tool notes="" thumbnail="" url="http://www.ifixit.com/Tools/Soldering-Kit/IF145-018">Soldering Iron</tool>
      <tool notes="" thumbnail="" url="http://www.ifixit.com/Item/phillips_screwdriver">phillips screwdriver</tool>
   </tools>
   <parts>
      <part notes="" thumbnail="" url="http://www.ifixit.com/Item/1_2%22_heat_shrink_3%22_long">1/2&quot; heat shrink 3&quot; long</part>
      <part notes="" thumbnail="" url="http://www.ifixit.com/Item/2%27_18_gauge_high_temperature_insulation_stranded_wire">2&apos; 18 gauge high temperature insulation stranded wire</part>
      <part notes="" thumbnail="" url="http://www.ifixit.com/Item/Rosin_core_solder">Rosin core solder</part>
      <part notes="" thumbnail="" url="http://www.ifixit.com/Item/Two_pack_of_194LL_turn_signal_marker_lamps">Two pack of 194LL turn signal/marker lamps</part>
   </parts>
   <flags>
      <flag id="GUIDE_USER_CONTRIBUTED" title="User-Contributed Guide">An awesome member of our community made this guide. It is not managed by iFixit staff.</flag>
   </flags>
   <documents>
      <document url="http://ifixit-documents.s3.amazonaws.com/ptZoYsnRXHL4TNJP.pdf">Honda-Odyssey-Rear-Window-Actu.pdf</document>
   </documents>
   <prerequisites />
   <steps>
      <step number="0" title="">
         <lines>
            <line bullet="black" level="0">Download attached PDF.
               <text_raw>Download attached PDF.</text_raw>
            </line>
         </lines>
         <images>
            <image />
         </images>
      </step>
   </steps>
   <conclusion><p>To reassemble your device, follow these instructions in reverse order.</p></conclusion>
</procedure>

