<?xml version="1.0" encoding="UTF-8"?>
<procedure locale="en" xmlns="http://omanual.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://omanual.com/openmanual_0.2.xsd">
   <title>Repairing Palm Treo 600 Keyboard</title>
   <summary />
   <image>http://d3nevzfk7ii3be.cloudfront.net/igi/al5TDMhHeGyeJNCm</image>
   <author id="207807">Clement Poisson</author>
   <time_required>10 minutes</time_required>
   <difficulty>Easy</difficulty>
   <categories>
      <category>Palm Treo 600</category>
   </categories>
   <introduction><p>Replace the keyboard!!</p></introduction>
   <introduction_rendered><p>Replace the keyboard!!</p><div class="tools"><strong>Tools</strong><ul><li><a href="http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000">Plastic Opening Tools</a></li><li><a href="http://www.ifixit.com/Tools/Metal-Tweezers/IF145-020-2">Tweezers</a></li><li><a href="http://www.ifixit.com/Tools/Spudger/IF145-002">Spudger</a></li></ul></div></introduction_rendered>
   <tools>
      <tool notes="" thumbnail="http://da2lh5cs8ikqj.cloudfront.net/cart-products/kDMlRd6QFSgQpqCw.mini" url="http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000">Plastic Opening Tools</tool>
      <tool notes="" thumbnail="" url="http://www.ifixit.com/Tools/Metal-Tweezers/IF145-020-2">Tweezers</tool>
      <tool notes="" thumbnail="http://da2lh5cs8ikqj.cloudfront.net/cart-products/whBKtCmrn6TIVby2.mini" url="http://www.ifixit.com/Tools/Spudger/IF145-002">Spudger</tool>
   </tools>
   <parts />
   <flags>
      <flag id="GUIDE_USER_CONTRIBUTED" title="User-Contributed Guide">An awesome member of our community made this guide. It is not managed by iFixit staff.</flag>
   </flags>
   <documents />
   <prerequisites>
      <prerequisite id="1755" locale="en" path="/Repairing-Back-Case-1755/procedure.xml">Repairing Palm Treo 600 Back Case</prerequisite>
      <prerequisite id="2150" locale="en" path="/Installing-Front-Case-2150/procedure.xml">Installing Palm Treo 600 Front Case</prerequisite>
   </prerequisites>
   <steps>
      <step number="0" title="">
         <lines>
            <line bullet="red" level="0">On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
               <text_raw>On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/obnTCBVjIWtTQTIZ</image>
         </images>
      </step>
      <step number="1" title="">
         <lines>
            <line bullet="black" level="0">Use the T6 Torx Screwdriver to remove all 4 screws.
               <text_raw>Use the T6 Torx Screwdriver to remove all 4 screws.</text_raw>
            </line>
            <line bullet="icon_note" level="0">You have to first remove the Stylus to  access the 4th screw.
               <text_raw>You have to first remove the Stylus to  access the 4th screw.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/YAem6KvW6JpdEyP3</image>
            <image orderby="2">http://d3nevzfk7ii3be.cloudfront.net/igi/AloIJ1q3GPojNAxU</image>
         </images>
      </step>
      <step number="2" title="">
         <lines>
            <line bullet="black" level="0">Using a plastic opening tool, carefully separate the front and back cases.
               <text_raw>Using a plastic opening tool, carefully separate the front and back cases.</text_raw>
            </line>
            <line bullet="icon_note" level="0">&lt;strong&gt;Note:&lt;/strong&gt; The antenna will detach from the phone.
               <text_raw>&apos;&apos;&apos;Note:&apos;&apos;&apos; The antenna will detach from the phone.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/VIXJeTyoDDosj5KB</image>
            <image orderby="2">http://d3nevzfk7ii3be.cloudfront.net/igi/UFI6ndJ5KKRBCNdA</image>
         </images>
      </step>
      <step number="3" title="">
         <lines>
            <line bullet="red" level="0">Using a T6 Torx Screwdriver, remove the two screws.
               <text_raw>Using a T6 Torx Screwdriver, remove the two screws.</text_raw>
            </line>
            <line bullet="icon_note" level="0">The motherboard will now be loose from the front case.
               <text_raw>The motherboard will now be loose from the front case.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/BRBBQuNaJHTBdIUs</image>
            <image orderby="2">http://d3nevzfk7ii3be.cloudfront.net/igi/ekCmuEAXoIMQgCXw</image>
         </images>
      </step>
      <step number="4" title="">
         <lines>
            <line bullet="red" level="0">Using the spudger, flip open the clasp that holds the data ribbon in place.
               <text_raw>Using the spudger, flip open the clasp that holds the data ribbon in place.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/al5TDMhHeGyeJNCm</image>
         </images>
      </step>
      <step number="5" title="">
         <lines>
            <line bullet="black" level="0">Pull out the ribbon.
               <text_raw>Pull out the ribbon.</text_raw>
            </line>
            <line bullet="icon_note" level="0">The keyboard will disconnect from the phone.
               <text_raw>The keyboard will disconnect from the phone.</text_raw>
            </line>
         </lines>
         <images>
            <image orderby="1">http://d3nevzfk7ii3be.cloudfront.net/igi/kZtFTWTT4dAWOhyZ</image>
         </images>
      </step>
   </steps>
   <conclusion><p>To reassemble your device, follow these instructions in reverse order.</p></conclusion>
</procedure>

