Answers

  • Answer to: Inspiron 1526 - Bad motherboards galore

    Iri2008, please goto the site provided by rj above and click the display link, last option on left column. That is the detailed breakdown of the monitor assembly.

  • Answer to: PSP 3000 not working

    make sure you didnt' hold down said key when booting up your device. If it is still an issue,try to clean around the button with a little alcohol. If still no go, then you have worn out the button itself.

  • Answer to: Cant install drivers Via USB?

    Control Panel System Hardware Tab Driver Signing click on ignore, and see if they will install

  • Answer to: Cant start my computer after HD change

    If nothing is turning on after the overheating, do check that nothing got accidentally unplugged on the motherboard. If there is absolutely nothing unplugged, such as fan leads or perhaps even sensor leads, then the overheating damaged a component on the motherboard. Hard to say exactly which part though...

  • Answer to: Steam wand leaking. Not enough pressure for a good shot!

    This is one of the main problems with home espresso machines. They all literally only last a few years, five at best i've heard. The problem with yours is probably a blown seal, much like an o-ring, some where in the wand connection. If you can dis-assemble the device, voiding any remaining warranty by the way, you can try to just clean the o-ring area and it may become usable for another year at the most. Contact the vendor if possible for an OEM replacement o-ring so that it matches in size and thickness correctly.

  • Answer to: Power supply won't connect

    After you take apart the laptop, if it is just a loose connector, you should be able to just solder it back in place.

  • Answer to: Why my new ps3 slim 250gb not switching on

    Possibly try a friends power outlet and/or converter to be sure you are supplying the 110v to it, and not a full 220v

  • Answer to: Do I really need a anti-static strap/mat for dismantling a desktop?

    You do not need an anti static mat or wrist strap. It is best to have it plugged up, and unplug the power connector off the motherboard. Make sure you have one hand, or your forearm touching some metal part of the case while working. I am a field tech, and have never carried around a mat or strap. Just take the other necessary precautions.

  • Answer to: gas pedal will not move

    Is the clutch in highest speed? I know that my mower's gas peddle stays against the floor if it is in slowest gear.

  • Answer to: recharge connector plug doesn't work

    The charging port should be a standard mini-USB connection. Try hooking the phone up to your computer to see if it shows any sign of life. If so, double check that working charging adapter with a friends phone, or use their charging adapter. If it doesn't even show signs of life plugged into a computer (should try to charge itself from the computer) then the USB port on the phone is damaged, and is not so easily repairable.