Quote from urdus:

not necessary. just attach a string around both the screen and the keyboard. it will stay in a steady position..

-urdus.

Excellent tip! Thanks, this allowed me to skip steps 10 and 11 (any unnecessary tinkering with the logic board is recommended).

Before beginning, I found some small plastic bags and labeled each of the with the location the screws would come from once removed and the appropriate step number. Once the screws were removed I placed them in the labeled bags and did not have to worry about mixing screws up. Also, provided a good way to insure that no steps were skipped in the reverse process

by Scott Rose Jan 4 @ 11:12 PM

Be careful when reassembling your laptop -- do not put the screw into the DVI port! It will not come out.

To keep this from possibly happening, I placed 2 pieces of tape over the DVI connector pin holes.